LED Lights For Clear and Translucent Kick Tails - Green
This package is more than traction—it’s a high-performance gas pedal for your surfboard. By replacing a soft, compressible foam kick tail that absorbs energy with a rigid-core kick that transfers energy, the Stingray mounting plate and interchangeable kick tails that attach to it deliver 100% of the energy from your back foot directly to your tail. Experience the massive increase in power and control that only a rigid-core system can provide.
This package consists of a Stingray™ Mounting Plate that attaches to your board with adhesive like you're used to with traction pads, an Interchangeable Kick Tail and a Grip 1 front deck pad. Swap between waxed or EVA foam covered rigid-core kick tails in seconds to perfectly match the conditions or your riding style.
30-DAY SURF WITH CONFIDENCE GUARANTEE
Install it. Surf it. Push it. If you’re not completely stoked, return it used or new within 30 days and we’ll give you a full refund.
We know that trying something new takes confidence—so we’re taking all the risk. Feel the difference in your carves and power transfer. If this package doesn't upgrade your performance within 30 days, send it back, used or new, for a no hassle refund.
🏆 MODULAR PERFORMANCE: Once you own a kick tail, additional boards only cost $29 each to set up (if you don't need the Grip 1 front deck pad). One kick tail. Multiple boards. A future-proof, modular quiver.
WHAT’S INCLUDED
-
RIKT Stingray™ Mounting Plate: The ultra-low profile, rigid foundation for your board.
-
1 × Interchangeable Kick Tail: Select Flat Top or Vertical Rise above.
-
1 × Grip 1 front deck pad
-
Installation Hardware: Includes stainless steel screws, L-key, sandpaper, and RIKT power clamps. One set of clamps per customer.
COMPATIBILITY
Designed for shortboards with squash tails, swallow tails, and round tails. Not designed for foam boards. Kick tails are 8.75" wide. Make sure your board is at least 10.5" wide 4.5" from the tail to insure a good fit.
COMPATIBILITY
Designed for shortboards with squash tails, swallow tails, and round tails. Not designed for foam boards. Kick tails are 8.75" wide. Make sure your board is at least 10.5" wide 4.5" from the tail to insure a good fit.
- In stock, ready to ship
These LED lights make your kick tail come alive at night! We designed our clear kicks for lighting up a wave pool at night and if you keep your surfboard in your room your board works as an accent light. We recommend using three lights for each side of the kick tail. The lights come with waterproof plastic bags. The lights are technically waterproof but to play it safe ALWAYS put your lights in the supplied plastic bag and make sure the top is sealed before surfing. The lights come in blue, purple, pink, red, orange, white and green colors.
Each light kit comes with 50 lights and 10 bags. The lights are very easy to use. Just pull the tab to turn them on, place three of them in the plastic bag, insert the bag into your RIKT under-compartment area and mount your kick tail. Each light has its own battery and should last 4-5 days before fading out completely. The first day is brightest and then they get dimmer. We're researching light options that shine brighter for longer, but for now this is our best option.
IMPORTANT INFORMATION
RIKT interchangeable kick tails deliver the highest level of performance in the RIKT system, but they require a smooth deck surface for proper adhesion.
For best results:
- New boards are ideal.
- Used boards must be free of deep pressure dings where the mounting plate will be installed.
- The deck must be completely clean and free of wax or residue before installation.
If your board has heavy pressure dings in the tail area, we recommend choosing a Grip 2 traction pad with an integrated kick instead of an interchangeable setup.
Following these guidelines ensures maximum performance and a secure, long-lasting bond.